Which of the following statements regarding ipv6 subnetting is not accurate?

We don’t have your requested question, but here is a suggested video that might help.

Best Match Question:

Which of the following statements is/are correct? I. The fragmentation is applicable for data in the datagram but not for header. II. Reassembly of the fragments must be performed at the destination because,theIntermediate networks may have different maximum transmission unit (MTU) sizes.III. In the IP header, the time-to-live (TTL) field is invariable. (A) I and II(B) I and III(c) II and III(D) All are correct

What is the Internet Protocol?

What are the principal components of the IPv4 protocol (check all that apply)?

The IPv4 header.

Match each of the following fields in the IP header with its description, function or use.

Question List:

Version field

Type-of-service field

Fragmentation offset field

Time-to-live field

Header checksum field

Upper layer field

Payload/data field

Datagram length field.

Answer List:

1. The value in this field is decremented at each router; when it reaches zero, the packet must be dropped. 

2. This field contains the IP protocol version number.

3. This field contains a UDP or TCP segment, for example.

4. This field indicates the total number of bytes in datagram.

5. This field contains the "protocol number" for the transport-layer protocol to which this datagram's payload will be demultiplexed - UDP or TCP, for example.

6. This field is used for datagram fragmentation/reassembly.

7. This field contains ECN and differentiated service bits.

8. This field contains the Internet checksum of this datagram's header fields.

That's Correct!

That's Incorrect. Try Again

What is an IP address actually associated with?

Which of the following statements is true regarding an IP address? (Zero, one or more of the following statements is true).

What is a subnet?

What is meant by an IP subnet? (Check zero, one or more of the following characteristics of an IP subnet).

Subnetting(a).

Consider the three subnets in the diagram below.

What is the maximum # of interfaces in the 223.1.2/24 network?

Subnetting(b).

Consider the three subnets in the diagram below.

What is the maximum # of interfaces in the 223.1.3/29 network?

Subnetting(c).

Consider the three subnets in the diagram below.

Which of the following addresses can not be used by an interface in the 223.1.3/29 network? Check all that apply.

Plug-and-play.

What is meant by saying that DHCP is a "plug and play" protocol?

DHCP request message. 

Which of the following statements about a DHCP request message are true (check all that are true). Hint: check out Figure 4.24 in the 7th and 8th edition of our textbook.

IPv4 versus IPv6. 

Which of the following fields occur ONLY in the IPv6 datagram header (i.e., appear in the IPv6 header but not in the IPv4 header)?  Check all that apply.

Purpose of DHCP. 

What is the purpose of the Dynamic Host Configuration Protocol?

We gratefully acknowledge the programming and problem design work of John Broderick (UMass '21), which has really helped to substantially improve this site.

Copyright © 2010-2021 J.F. Kurose, K.W. Ross
Comments welcome and appreciated:

1.A network with 10 bits remaining for the host portion will have how many usable hostaddresses?

2.A network with a CIDR notation of /26 would have what subnet mask?

23. An IP address of 192.168.18.73/28 has what network ID?

24. An interface that manages traffic from multiple VLANs is known by what term?

25. Given a host IP address of 172.16.1.154 and a subnet mask of 255.255.254.0, what is the network IDfor this host?

26. How large is the 802.1Q tag that is added to an Ethernet frame when using VLANs?

27. How many subnets can a /48 site prefix support?

28. If the EUI-64 standard is used, what part of an IPv6 address is affected?

29. On a Cisco switch, what would the security association identifier be for VLAN 13?

30. On certain Cisco products, what command can be used to create and send helper messages thatsupport several types of UDP traffic, including DHCP, TFTP, DNS, and TACACS+?