Match each item with a statement below.
* A system that allows multiple computers to share a single IP address when connecting to the Internet
* A standard set of rules that defines how different components of a system operate together
* A command-line utility that can be used to display, change, add, and delete network configuration settings on a computer, including basic and advanced settings
* A command-line utility that can be used to view or debug the
data returned from a DNS server in response to a DNS name resolution query
* A system to tunnel IPv6 addressed packets over an IPv4 network, even if NAT is used on the IPv4 network
* The ability for Windows 10 to detect when it is connected to a different network and perform actions based on the change
* A system used to resolve computer NetBIOS names to IP addresses
* A command-line utility that can be used to test IP communications between the computer running the
utility and a remote target
* A setting that controls how your computer views other computers on the network and advertises its presence on the network
Which of the following is an automated mechanism used to assign IP addresses subnet masks default gateways DNS servers?
DHCP is the Dynamic Host Configuration Protocol. It is used to automatically provide IP addressing information to clients. A DHCP server can assign IP addresses, subnet masks, a DNS server address, and much more.
Which tool automatically assigns an IP address?
A Windows-based computer that is configured to use DHCP can automatically assign itself an Internet Protocol (IP) address if a DHCP server is not available.
Which of the following is used to automate the IP configuration of network hosts?
Dynamic Host Configuration Protocol (DHCP) is a network management protocol used to automate the process of configuring devices on IP networks, thus allowing them to use network services such as DNS, NTP, and any communication protocol based on UDP or TCP.
Which protocol is responsible for automatically assigning IP address and subnet mask?
DHCP. Dynamic Host Configuration Protocol (DHCP) is a protocol that will automatically assign TCP/IP addressing information to workstations over the network (see IETF draft standard RFC 2131, 2132, and 3397). The most common options set by DHCP are the network address, subnet mask, gateway, and DNS server address.